Winnerwell

Flashing Kit

$59.95

Flashing Kit
Flashing Kit Flashing Kit

The Flashing Kit should only be used in conjunction with one of Winnerwell insulated pipe sections:  2.1" Double Wall Pipe Section, 2.5” Triple Wall Pipe Section, and 3.5” Triple Wall Pipe Section.  The Flashing Kit is made from silicone which resists high temperatures and is held in place by stainless steel rings with six wing nuts. This Flashing Kit can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.  

(Features/Specs)

  • Made with silicone to resist high temperatures, creates a tight seal around the insulated pipe, and provides flexibility
  • Inner diameter: 4.7 inches Outer Diameter: 8.7” inches
  • Stainless steel rings and 6 wing nuts hold the Flashing Kit in place
  • Use with existing stove jacks or when installing a stove jack in a tent or shelter

Customer Reviews

Based on 40 reviews
90%
(36)
5%
(2)
3%
(1)
0%
(0)
3%
(1)
J
Jon Miller
Bought for the Kodiak cabin

Didn’t realize I would have to make holes in the existing stove jack so I never installed…. The flashing kit is super well built and I’m keeping it (even though I don’t need it) in case I ever have an alternate tent to add it to.

C
Customer

Flashing Kit

b
brian feeney
best one i used

this thing awesome only thing i would change is add a hose clamp stainless steel i had to but separate but besides that awesome

R
Robin Grayshield
Flashing leak.

When it heats up it tens to open up on one side. I’m not looking forward to a rain storm. Probably have to put a clamp around it.

C
C.
Silicon Cracked as Well

My silicon also split and cracked after a few uses... now it's completely falling apart. Customer support said I needed to have a photo to prove I didn't set it up incorrectly, which I did not happen to take... When I was taking apart my tent/stove I noticed all the cracking/splitting but I had to get out of camp so I did not stop to take an "in action" photo... I happened to reads Matt's comment after I was going to re-order, but I don't want to waste another $60... Hmmm what else to use for my classic jack 140....

Customer Reviews

Based on 40 reviews
90%
(36)
5%
(2)
3%
(1)
0%
(0)
3%
(1)
J
Jon Miller
Bought for the Kodiak cabin

Didn’t realize I would have to make holes in the existing stove jack so I never installed…. The flashing kit is super well built and I’m keeping it (even though I don’t need it) in case I ever have an alternate tent to add it to.

C
Customer

Flashing Kit

b
brian feeney
best one i used

this thing awesome only thing i would change is add a hose clamp stainless steel i had to but separate but besides that awesome

R
Robin Grayshield
Flashing leak.

When it heats up it tens to open up on one side. I’m not looking forward to a rain storm. Probably have to put a clamp around it.

C
C.
Silicon Cracked as Well

My silicon also split and cracked after a few uses... now it's completely falling apart. Customer support said I needed to have a photo to prove I didn't set it up incorrectly, which I did not happen to take... When I was taking apart my tent/stove I noticed all the cracking/splitting but I had to get out of camp so I did not stop to take an "in action" photo... I happened to reads Matt's comment after I was going to re-order, but I don't want to waste another $60... Hmmm what else to use for my classic jack 140....