Save 20% On All Bundles - Shop Now

Winnerwell

Flashing Kit

$59.99

Flashing Kit
Flashing Kit Flashing Kit

The Flashing Kit should only be used in conjunction with one of Winnerwell insulated pipe sections:  2.1" Triple Wall Pipe Section, 2.5” Triple Wall Pipe Section, and 3.5” Triple Wall Pipe Section.  The Flashing Kit is made from silicone which resists high temperatures and is held in place by stainless steel rings with six wing nuts. This Flashing Kit can be used to create a weather-tight seal on existing stove jacks or when installing a stove jack in a tent or shelter.  

(Features/Specs)

  • Made with silicone to resist high temperatures, creates a tight seal around the insulated pipe, and provides flexibility
  • Inner diameter: 4.7 inches Outer Diameter: 8.7” inches
  • Stainless steel rings and 6 wing nuts hold the Flashing Kit in place
  • Use with existing stove jacks or when installing a stove jack in a tent or shelter

Customer Reviews

Based on 43 reviews
86%
(37)
5%
(2)
2%
(1)
0%
(0)
7%
(3)
J
Joselyn
No template included

We were unaware a hole had to be cut and the template that was supposed to be included was not. Only after watching a video about the flashing hole did we see it was supposed to have a template.

D
Don Romero
Easy set up

I followed the directions, played arts and crafts for about 10 minutes combined with templates and fastening the actual flashing kit in place. Set up as intended - we shall see how it holds up for the duration the season since I see some issues mentioned regarding heat and water leakage.
FYI - despite the dotted line pattern on the template I found it easier to overlay the the ring of the flashing against the dotted lines to cut the circle. Just watch your fingers.

S
Shane Doot
Was a bust

I had the same problem as the previous reviewer. Barely got to use it and it failed-cracked apart.

J
Jon Miller
Bought for the Kodiak cabin

Didn’t realize I would have to make holes in the existing stove jack so I never installed…. The flashing kit is super well built and I’m keeping it (even though I don’t need it) in case I ever have an alternate tent to add it to.

M
Mike Duncan

Flashing Kit

123

Customer Reviews

Based on 43 reviews
86%
(37)
5%
(2)
2%
(1)
0%
(0)
7%
(3)
J
Joselyn
No template included

We were unaware a hole had to be cut and the template that was supposed to be included was not. Only after watching a video about the flashing hole did we see it was supposed to have a template.

D
Don Romero
Easy set up

I followed the directions, played arts and crafts for about 10 minutes combined with templates and fastening the actual flashing kit in place. Set up as intended - we shall see how it holds up for the duration the season since I see some issues mentioned regarding heat and water leakage.
FYI - despite the dotted line pattern on the template I found it easier to overlay the the ring of the flashing against the dotted lines to cut the circle. Just watch your fingers.

S
Shane Doot
Was a bust

I had the same problem as the previous reviewer. Barely got to use it and it failed-cracked apart.

J
Jon Miller
Bought for the Kodiak cabin

Didn’t realize I would have to make holes in the existing stove jack so I never installed…. The flashing kit is super well built and I’m keeping it (even though I don’t need it) in case I ever have an alternate tent to add it to.

M
Mike Duncan

Flashing Kit

123